Lexicon PCM 80 - REV 1 DUAL FX User Manual page 74

4.1 Organ/Room 2
The left input feeds a mono rotary speaker. ADJUST toggles the speeds. The right input
feeds a large room.
4.2 M Flange/Rvb
The left input feeds a mono tape flanger. ADJUST controls the depth. The right input feeds
a medium plate.
4.3 TapEko/Gate
The left input feeds a mono tap echo. ADJUST controls the echo feedback. The right
feeds a gated reverb. T
4.4 Eko15/Plate
The left input feeds a1 ips tape echo simulation. ADJUST controls the feedback amount.
The right input feeds a drum plate.
4.5 V Eko1/ Rvb
The left input feeds a varispeed tape echo simulation. ADJUST controls the tape speed
from 30ips to 3.75ips. The right input feeds a drum plate.
4.6 V Eko2/Rvb
The left input feeds a varispeed tape echo simulation with flanging. ADJUST controls the
tape speed from 30ips to 3.75ips. The right input feeds a drum plate.
4.7 V Eko / Eko
The left input feeds a varispeed tape echo simulation. ADJUST controls the tape speed
from 30ips to 3.75ips. The right input feeds an eighth-note echo. T
4.8 EkoRise/Rvb
The left input feeds a mono varispeed echo effect that changes rate when input stops. The
echoes rise in pitch and rate as they fade away. ADJUST controls the rate of the
varispeed change.The right input feeds a mono reverb.
4.9 EkoRise/Eko
The left input feeds a mono varispeed echo effect that changes rate when input stops. The
echoes rise in pitch and rate as they fade away. ADJUST controls the rate of the varispeed
change.The right input feeds a mono echo set to the same rate as the varispeed echo —
but this one doesn't rise.
ADJUST: Slow/Fast
ADJUST: Reel Brake
ADJUST: Feedback
ADJUST: Feedback
ADJUST: TapeSpeed
ADJUST: TapeSpeed
ADJUST: TapeSpeed
ADJUST: RiseSpeed
ADJUST: RiseSpeed
0–1
0–100
0–100
0–100
0–100
0–100
0–100
0–100
0–100
The Presets
3-19