The Dual FX Card uses five Reverb blocks and five Multi-Effect blocks to
produce 25 Dual FX algorithms. The five reverb blocks and the five multi-effect
blocks are described on the following pages. Each of the 25 algorithms which
can be configured from these blocks is presented on a separate page, following
the block descriptions. These pages give you easy reference to the diagram of
the specific reverb and effect blocks used in the algorithm, as well as the
complete parameter matrix for that algorithm. The control and submixer param-
eters which allow configuration and routing of the effect blocks are described in
the preceding chapter. Refer to the PCM 80 User Guide for detailed descriptions
of all other effect parameters.
The Dual FX Blocks and the Algorithms
The Dual FX Blocks
and the Algorithms
2
2-1