Lexicon PCM 80 - REV 1 DUAL FX User Manual page 59

PCM 80 Dual FX User Guide
3-4
1.8 Mix>Gate>LP
This stereo program has a gated reverb in series with a 24dB/octave lowpass filter.
ADJUST controls the filter cutoff.
1.9 Mix>Gate>BP
This stereo program has a gated reverb in series with a 24dB/octave bandpass filter.
ADJUST controls the filter center frequency.
2.0 Mix>Car Park
A large concrete parking garage. ADJUST controls overall decay and feedback. As it is
raised, the ambience becomes increasingly ominous. At the highest settings, an eerie
ringing rises up and rings out.
Presets 2.1-2.7 are a series of stereo ambience/eq programs. Each program combines
one of three basic reverberant spaces with a low, high, or bandpass 24dB/octave filter.
Amb1 is a highly colored room with short decay. Amb2 is more transparent with a
moderate decay. Amb3 is a tight space with prominent reflections. ADJUST controls the
filters following the ambience effect, allowing you to quickly tailor the sound to create the
impression of different wall coverings, open and closed doors, telephones, radios,
distance of the source, etc. The Soft Row contains additional parameters for fine tuning.
Mono source versions of these effects are located in Bank X2 4.3-4.9.
2.1 Mix>Amb1>LP
Amb1 followed by 24dB/octave lowpass filter. ADJUST controls high frequency cutoff.
2.2 Mix>Amb1>HP
Amb1 followed by 24dB/octave highpass filter. ADJUST controls low frequency cutoff.
2.3 Mix>Amb1>BP
Amb1 followed by 24dB/octave bandpass filter. ADJUST controls band frequency.
2.4 Mix>Amb2>LP
Amb2 followed by 24dB/octave lowpass filter. ADJUST controls high frequency cutoff.
2.5 Mix>Amb2>HP
Amb2 followed by 24dB/octave highpass filter. ADJUST controls low frequency cutoff.
2.6 Mix>Amb3>LP
Amb3 followed by 24dB/octave lowpass filter. ADJUST controls high frequency cutoff.
2.7 Mix>Amb3>HP
Amb3 followed by 24dB/octave highpass filter. ADJUST controls low frequency cutoff.
2.8 StereoFutz 1
Highly colored ambience for treating stereo program source material to produce TV
rooms, sounds coming from around the corner and down the hall, etc. ADJUST controls
the overal high frequency content.
2.9 StereoFutz 2
Similar to StereoFutz1, but with a more prominent decay. ADJUST controls the overall
high frequency content.
3.0 Outdoor
A simple outdoor ambience with some early reflections. ADJUST controls the delay of the
echo tails.
3.1 OutdoorWall
An outdoor ambience with a reflecting wall 100 yards away. ADJUST changes the
apparent distance of the wall.
ADJUST: Hi Cut
ADJUST: Center
ADJUST: Spooky
ADJUST: Hi Cut
ADJUST: Lo Cut
ADJUST: Band
ADJUST: Hi Cut
ADJUST: Lo Cut
ADJUST: Hi Cut
ADJUST: Lo Cut
ADJUST: Tone
ADJUST: Tone
ADJUST: Tails
ADJUST: Distance
Lexicon
0–100
0–100
0–127
0–127
0–127
0–127
0–127
0–127
0–127
0–127
0–127
0–127
0–32
0–100