The Presets - Lexicon PCM 80 - REV 1 DUAL FX User Manual

The Dual FX Algorithm Card has 250 factory-designed presets which are
organized into five banks of 50 each (labeled X0, X1, X2, X3 and X4). As with
the internal PCM 80 banks, each bank is organized in a matrix of 5 rows of 10.
Press the front panel Program Banks button to display the first bank. Press it
again to switch to another bank. Simultaneously press Program Banks and
either the Up or Down button to backstep through the banks. The display will
show the bank label and the matrix location, the preset name, and the algorithm
from which the effect is derived.
Turn SELECT to scroll through all of the presets in a bank in numerical order. Use
Up or Down to jump forward or backward by 10. Press Load/
displayed preset.
In the Program Banks mode (as in the Register Banks mode), ADJUST is a soft
knob. Each preset has one or more parameters patched to this knob, providing
a quick way to make useful changes to the effect. (A
corner of the display indicates that the currently running effect has an ADJUST
knob patch.) When you turn ADJUST, the display will show the name assigned
to ADJUST, as well as the patch value. Continue turning ADJUST to alter the
patch value along its available range. In addition, all of the presets marked with
a T can be synchronized to tempo. To set the tempo, press the front panel Tap
button twice in time with the beat. (Tempo can also be dialed in as a parameter
value, or it can be determined by MIDI Clock.) Be sure to try these effects
synchronized with MIDI sequence and drum patterns.
The preset names often give clues as to the routing configuration used. Effect
blocks configured in series are separated by the symbol >. Dual Mono In/Stereo
Out effects are separated by the symbol +. Dual Mono In/Mono Out effects are
separated by the symbol /. The Dual FX program banks are organized as follows:
Matrix
Bank Location
X0 0.0–4.9
X1 0.0–4.9
X2 0.0–2.9
3.0–4.9
X3 0.0–2.9
3.0–4.9
X4 0.0–2.4
2.5–4.9
Each preset is described in this section with a header which indicates the matrix
location, the program name, the name assigned to the ADJUST knob, and the
range of ADJUST knob control. This header is followed by a brief description of
the effect. For additional reference, at the end of this chapter is an alphabetical
list of the presets, with references to bank and matrix location.
symbol in the upper left
Dual FX Routing
Stereo
Stereo
Stereo
Mono In/Stereo Out
Dual Mono In/Stereo Out
Dual Mono In/Mono Out
"Clean Slate" versions of the Dual FX algorithms
Dual Mono In/Mono Out

The Presets

to load any
The Presets
3
3-1