Lexicon PCM 80 - REV 1 DUAL FX User Manual page 73

PCM 80 Dual FX User Guide
Dual Mono In/Dual Mono Out
(X3 3.0 – X3 4.9)
3-18
Presets 3.0-4.9 are configured as Dual Mono In/Dual Mono Out. The left input feeds a
Mono In/Mono Out 4-voice effect which is fed directly to the left output. The right input
feeds a Mono In/Mono Out reverb which is fed directly to the right output. These presets
can be used to provide two independent mono effects to a mono source, or to add mono
processing to two different mono sources. They are not intended to be used with stereo
source material.
3.0 L dks R Lvl
A dual mono program. The left input acts as a "key" input. No audio is passed from the
left input to the left output. The right input is passed to the right output only. The right signal
level is ducked whenever audio is detected in the left input. ADJUST controls the amount
of ducking, from 0 to –24dB. The Soft Row contains AR to control the ducking attack and
release.
3.1 L dks R Eq
A variation of the level ducker. In this program, the right channel is slightly EQ'd. ADJUST
controls the amount of ducking when signal is detected in the left input. AR Env controls
the ducker, as well as the high and low frequency. The Soft Row contains the EQ controls
3.2 L dks R HiFc
In this ducking program, the high frequency content of the right signal is ducked when
signal is detected at the left input. ADJUST controls the range of high frequencies that are
ducked.
3.3 L dks R LoFc
In this ducking program, the low frequency content of the right signal is ducked when
signal is detected at the left input. ADJUST controls the range of low frequencies that are
ducked.
3.4 L dks R Band
In this ducking program, the frequency band in the right signal is ducked when signal is
detected at the left input. ADJUST controls the width of the band.
3.5 Slap / Kick
The left input feeds a mono15 ips slap delay. The right feeds a mono kick drum reverb.
ADJUST controls the relative balance of the two effects. T
3.6 Phone X-Fade
This variation of PhoneInRoom1, provides an automatic cross fade between left and right
inputs. Click ADJUST to fade between a phone filtered left input and and unprocessed
right input. The Soft Row contains the AR Env controls to set the cross fade rates.
3.7 ToneL/PlateR
The left input drives a resonator to produce a bass tone. The right input feeds a plate
reverb. T
3.8 Phone / Room
The left input feeds a variable phone filter. ADJUST controls the tone. The left input feeds
a medium room.
3.9 TV / Room
The left input feeds a variable TV filter. ADJUST controls the tone. The left input feeds
a small dark room.
4.0 Organ/Room 1
The left input feeds a mono rotary speaker. ADJUST toggles the speeds. The right input
feeds a medium room.
ADJUST: Duck dB
ADJUST: Duck dB
ADJUST: Hi Duck
ADJUST: Hi Duck
ADJUST: Duck Band
ADJUST: FX/Rvb Bal
ADJUST: X-Fade
ADJUST: Rvb Out
ADJUST: PhoneFutz
ADJUST: TVFutz
ADJUST: Slow/Fast
Lexicon
0–24
0–24
0–100
0–100
0–10
0–48
0–100
0–127
0–35
0–35
0–1