Lexicon PCM 80 - REV 1 DUAL FX User Manual page 21

PCM 80 Dual FX User Guide Lexicon
These parameters are described below, in the order in which they appear in the
Submixer row. (All other effect parameters are identical to those in the PCM 80,
and are described in the PCM 80 User Guide.)
RvbMix, FX Mix
These are independent wet/dry mix controls for the Rvb and FX effect blocks.
RvbInLvl, FX InLvl
These are independent input level controls for the Rvb and FX blocks.
Rvb In W, FX In W
These are input width controls for the Rvb and FX blocks. These are essentially
the same as the PCM 80 FX Width and Rvb Width parameters. The difference
is that the width control in the Dual FX algorithms is located at the input to the
effect. This makes it possible to independently alter the stereo image of material
feeding the two effect blocks.
RvbOutLvl, FX OutLvl
These are independent output level controls for the Rvb and FX blocks.
Rvb Out W, FX Out W
Like Rvb In W and FX In W, these parameters allow independent control of the
stereo image of the output of each effect block.
RvbHiCut, FX HiCut
These parameters provide independent 6dB per octave, stereo high-cut filters
on the outputs of the Rvb and FX blocks.
RvbLoCut, FX LoCut
These parameters provide independent 6dB per octave, stereo low-cut filters on
the outputs of the Rvb and FX blocks.
1-14