Table of Contents
Advertisement
This chapter describes all of the MPX 1 edit functions. As the first thing you are
likely to want to modify in a program are its effects, this section starts there and
then moves on to all of the functions available in Edit mode.
Note that, in Edit mode, as elsewhere, the Value button acts as a toggle to allow
you to assign "select" and "adjust" functions to either the knob or the < and >
buttons, whichever is most convenient. As the default state of the Value button
is On (lit) in Edit mode, any step by step instructions given in this section will
assume this state.
To edit any effect, press Edit, then press an Effect button to view all of the Effects
of that type, and to edit the parameters of the current Effect. The display will show
the Effect type and the name of the currently loaded Effect . Turn the knob to view
other Effects of the displayed type.
If you load a new Effect, an edit indicator will be
displayed to show that the current program has
been modified.
The Effect name will be marked with an asterisk ( ) and the Effect button light
will blink rapidly if the displayed effect can be loaded in the current program.
(Press and hold the Effect button to display the name of the Effect currently in
use.)
EQ
. select:
>
Effect Name
Editing
When Value is lit, the < and >
buttons select parameters, and
the knob adjusts the value of the
selected parameter.
Effect Editing
Editing
3
3-1
Advertisement
Table of Contents
