Mix; Bypass; Pgm Bypass - Lexicon MPX 1 - REV 2 User Manual

MPX 1 User Guide

Bypass

Press Options to select external
controllers to perform the same
functions as the front panel By-
pass and the Effect Bypass but-
tons. Press Options again to exit.

Pgm Bypass

5-4

Mix

Each MPX 1 program has its own Master Mix and Level parameters, as well as
individual mix and level settings for each Effect. These settings are stored as
integral parts of the program. The Mix parameter allows you to select Program,
to have each program load with its own master mix setting, or Global which
allows any program Master Mix setting to become the global setting for all
subsequently loaded programs.
Note that you can alter the global setting at any time by pressing Mix and
changing the Mix setting on the Mstr Mix and Level screen. Once you have
altered Mstr Mix, subsequent programs will load with the new value as the global
setting.
The Bypass parameter allows you to determine the behavior of the MPX 1 when
the front panel Bypass button is pressed. When the Bypass button is pressed,
it will light and a message will be briefly displayed to indicate that Bypass is on.
Pressing Bypass again will briefly display the message that Bypass is off, and
turn the button light off.
The choices available from the Bypass Mode menu are:
Bypass:
All Mute:
Input Mute:
Option: Bypass Source Assignments
You can assign external controllers to activate Master Bypass and or Bypass for
any of the six effect blocks: Pitch, Chorus, EQ, Mod, Delay or Reverb.
Press Options to display the Bypass Source list. Use the < and > buttons to
select the bypass function: Mstr, Pitch, etc. Use the knob to assign the control
you want to have activate the selected function. The choice of controllers is:
Pgm Bypass allows you to determine the behavior of the MPX 1 when a new
program is loaded. The choices available are: All Mute or Bypass.
Completely bypasses the MPX 1, passing unproc-
essed audio directly through to the outputs. (This is the
default setting.)
Mutes both the input and the output signal, giving
complete silence.
Mutes the input to the MPX 1, allowing the tail of the
effect to ring out.
None (the default setting)
Tog 1-3
Sw 1-3
CC 1-31
CC 33-119
Lexicon