Table of Contents
Advertisement
The MPX 1 has 10 internal program chains, each made up of ten "links". You can
assign any program to any link in the chain with the controls in this menu. A chain
can be loaded with a MIDI Program Change message, or by selecting Members
of Pgm Chains as a DataBase sorting option and loading the chain from
Program mode. When the Members of Pgm Chains is selected as a DataBase
sorting option, use the < and > buttons (or MIDI Program Change numbers) to
select a chain. Use the knob ( or Pgm+/Pgm-) to load programs assigned to the
selected chain.
Once a chain is loaded, the source assigned to Pgm+ and Pgm- will load the next
higher or lower program in the chain. The screens in the Program Chains menu
allow you to select chains, and make chain and link assignments as shown
below.
Chain select:
< >
With the chain number you want to work with displayed in
the lower right of the display, use the knob or the < and >
buttons to scroll to the chain assignment screen.
1 MPX Blue
<
Select either of these two fields to display any MPX 1 program
number (and the corresponding program name) on the top line,
and the position you want the displayed program to occupy in the
chain (Link 1-10) on the bottom line.
Options: Unchanged, Start at n, and Clear chain
Press Options from any of the Chain screens to access an additional set of
controls which allow you to quickly alter chain assignments.
Unchanged:
Selections made in Options take effect immediately on
returning to the Chain menu. This selection allows you to
enter and exit Options without effecting any change.
Start at n:
This control allows you to completely reassign a chain,
starting with the program number selected here, and in-
cluding the next consecutive nine program numbers. This
is particularly useful for creating chains from your own
programs.
Clear Chain:
This control allows you to completely clear all assignments
for the active chain.
Chain 1
Assign Chain 1
< > to Pgm#
Select the MIDI Program Change number (1-128)
that you want to load the chain.
Chain 1 Link 1
Program Chains
1
which allows you to quickly
configure any 10 consecutively
numbered programs as a Chain,
and Clear Chain, which removes
all assignments from the active
Chain.
System Controls
Press Options to
access Start at n,
5-11
Advertisement
Table of Contents
