Looper; Ducker - Lexicon MPX 1 - REV 2 User Manual

Looper

Mix 0-100%
Level Off, -89 to +6dB
Time 0-2000ms
1:24-24:1echo/beat
0-2260 ft, 0-688 M
(Time Units)
InMix 0-100%
(Fbk insert) Pitch, Chorus, EQ,
Mod, Reverb, Delay
Sense 0-100
Pan 50L to C to 50R
Rls 0-100
Atk 0-100

Ducker

Mix 0-100%
Level Off, -89 to +6dB
Time 0 -2000ms
1:24-24:1echo/beat
0-2260 ft, 0-688 M
(Time Units)
Fbk -100 to +100%
(Fbk insert) Pitch, Chorus, EQ,
Mod, Reverb, Delay
Sense 0-100
Rls 0-100
* = Interpolated; ( ) = Option of preceding parameter
Dry/Wet ratio
Amount of effect in the processed signal
Delay time
Selects ms, note, feet, meters, or Tap ms
Ratio of input to feedback going into the delay
The left output of the selected source is scaled by Fbk
Sensitivity of InMix to input amplitude
Output panner
Envelope release time constant
Envelope attack time constant
Dry/Wet ratio
Amount of effect in the processed signal
Delay time
Selects ms, note, feet, meters, or Tap ms
Feedback level
The left output of the selected source is scaled by Fbk
Amount of ducking
Envelope release time constant
The Effects and Parameters
In the Looper effect InMix controls
the ratio of input to feedback into
the delay. This parameter is
ducked by the input level, so that
louder signals route the input sig-
nal into the delay, and softer sig-
nals route the feedback signal into
the delay. When Sense is at 0, no
ducking will occur. At 100 the input
will be ducked by even the lowest
input levels.
A/B Freeze Capture EQ
Similar to Looper, with the wet
output getting quieter as the input
gets louder. When Sense is at 0,
no ducking will occur. At 100 the
input will be ducked by even the
lowest input levels.
DuckedDelay
7-25