Dump; Midi Maps - Lexicon MPX 1 - REV 2 User Manual

Multi processor fx
Hide thumbs Also See for MPX 1 - REV 2:
Table of Contents

Advertisement

MPX 1 User Guide

Dump

Press Options to
select MIDI transmit
speed. Press Options
again to exit.

MIDI Maps

5-10
This control allows you to perform MIDI dumps of Current Pgm, All Programs,
Map 1-3, Chain 1-10, Setup 1-5. Select whichever of these categories you want,
and press Store.
Options: Xmit Speed
Press Options to select one of four MIDI transmission speeds (Slow, Medium
Slow, Medium Fast and Fast.)
NOTE: The Device ID used in dumps is the current Receive Device ID.
Program Change 0-127 can be mapped to any MPX 1 program. Three 128-
element maps are available. When you select MIDI Maps from the System
menu, you can select any one of the three maps and make your selections from
screens like the ones shown below.
Pgm Maps select:
< >
With the map number you want to work with dis-
played in the lower right of the display, use the < and
> buttons to scroll to the mapping screen.
Select either of these two fields to display any MPX 1 program
number (and the corresponding program name) on the top line,
and the MIDI Program Change number you want the program
mapped to on the bottom line.
Once you've created maps, you can make them active by setting the DataBase
sorting option to Show Members of MIDI Maps. (Press Program, then press
Options.)
Options: Unchanged, Start at n, Clear Map, and Clear n-n
Press Options from either of the Map screens to access an additional set of
controls which allow you to quickly alter map assignments.
Unchanged:
Selections made in Options take effect immediately on
returning to the Map menu. This selection allows you to
enter and exit Options without effecting any change.
Start at n:
This control allows you to completely reassign a map,
starting with the program number selected here, and in-
cluding the next consecutive 127 program numbers.
Clear Map:
This control allows you to completely clear all assignments
for the active map.
Clear n-n:
This control allows you to completely clear only a specified
section of assignments for the active map.
Map 1
1 MPX Blue
<
Map 1 Pgm# 1
Lexicon

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mpx 1

Table of Contents