Slaving Two Or More Mpx 1S - Lexicon MPX 1 - REV 2 User Manual

The configuration below shows the MIDI connections for controlling the MPX 1
simultaneously with MIDI Clocks from a sequencer, and messages from another
MIDI controller. Note that the controller is set to "local control off" and the
sequencer is set to "echo input".
MIDI In
Edit mode Tempo Source set to MIDI
Two MPX 1s can be slaved together by connecting a cable from the MIDI OUT
jack of the master to the MIDI IN jack of the slave. Additional MPX 1s can be
slaved to the master by connecting a cable from the MIDI THRU port of one slave
unit to the MIDI IN port of the next unit.
MIDI In
System mode MIDI SysEx set to On
Receive Device ID must match Master Xmit Device ID
MIDI Thru MIDI In MIDI Out
MIDI Out
System mode MIDI Automation set to On
Slave
MIDI Operation
MIDI Out
MIDI In
(MIDI Clock)
Slaving two or more
MPX 1s
Master
6-3