Echo (M), Echo (S) And Echo (D) - Lexicon MPX 1 - REV 2 User Manual

MPX 1 User Guide

Echo (M), Echo (S) and Echo (D)

The Echo effects are similar to
the Delay effects, except the feed-
back inputs are sent through 1-
pole low-pass filters.
Damp provides control over the
cutoff frequency of the filter. (In-
creasing Damp lowers cutoff fre-
quency.)
Guitar Solo Tape Echo
7-24
Echo (M)
Echo (D)
Mix 0-100%
Level Off, -89 to +6dB
Time 0-2000ms
1:24-24:1echo/beat,
0-2260 ft, 0-688 M
(Time Units)
Time1 0-1000ms
1:24-24:1echo/beat,
0-1130 ft, 0-344 M
(Time1 Units)
Time2 0-1000ms,
1:24-24:1echo/beat
0-1130 ft, 0-344 M
(Time2 Units)
Lvl 1* Off, -95 to 0dB
Lvl 2* Off, -95 to 0dB
Fbk 1 -100 to +100%
(Fbk insert) Pitch, Chorus, EQ,
Mod, Reverb, Delay
Fbk 2 -100 to +100%
Damp1 0 to +100%
Damp2 0 to +100%
* = Interpolated; ( ) = Option of preceding parameter
Dry/Wet ratio
Amount of effect in the processed signal
Delay time in mono version
Selects ms, note, feet, meters, or Tap ms
Left delay time
Selects ms, note, feet, meters, or Tap ms
Right delay time
Selects ms, note, feet, meters, or Tap ms
In Echo (D) controls left delay output level
In Echo (D) controls right delay output level
Left feedback level
The outputs of the selected source are scaled by Fbk
Right feedback level
Cutoff frequency of low-pass filter in left feedback path
Cutoff frequency of low-pass filter in right feedback path
Lexicon
Echo (S)