The Rear Panel - Lexicon MPX 1 - REV 2 User Manual

MPX 1 User Guide

The Rear Panel

S/PDIF
S/PDIF format digital connectors
conform to CP-340 Type II consumer
standards. (44.1kHz only)
REMOTE POWER IN
2.5mm connector for 9
VAC MIDI remote power.
AC Power
Standard 3-pin IEC power connector.
100-240V, 50-60Hz automatic switching
to correct voltage range.
MIDI
IN
7-pin DIN connector for MIDI IN or
powered bidirectional MIDI remote.
THRU
5-pin DIN connector passes any
MIDI data received without change.
OUT
5-pin DIN connector transmits MIDI
data to other equipment.
1-2
Balanced Outputs
Output impedance is 600 , each side,
balanced, and levels up to +18dBu maxi-
mum full scale. 1/4" phone connectors
and XLRs provided.
Foot Pedal
1/4" Tip/Ring/Sleeve phone jack
provided for footpedal with 10k
to 100k impedance.
Foot Switch
1/4" Tip/Ring/Sleeve phone
jack for three independent
footswitches.
For control voltage input, use a 1/4" stereo plug with Sleeve connected to
ground, Tip connected to the control voltage, and Ring unconnected.
Balanced Inputs
Input impedance is 50k unbalanced, and 100k
balanced. Inputs accept input levels from -14dBu to
+20dBu. 1/4" phone connectors and XLRs provided.
Input Level
2-position (In/Out) switch for
matching input gain to the
source being used. The In
position adds 12dB of input
gain (unbalanced) to the in-
put stages. Out position pro-
vides 0dB of gain (balanced).
Lexicon