Saving Effects - Lexicon LDI 12T - REV 1 Manual

Using the PC-90
Naming Effects
To name a preset, simply double-click on the area where preset names are displayed. An editable
text field will appear that allows you to select any preset name you desire. Note that the editor will allow
you to change the names of any factory preset, however you must save that edited preset into a user
slot if you wish to permanently change the name of the preset. For descriptions of all presets, refer
to Chapter 6: Reference .

Saving Effects

The MMIO version of the PC-90 provides 100 user slots for your edited presets. Once you have
tweaked an effect to the point you are happy with it, and have named it, you can store it as follows:
1. Click on a preset to highlight it.
2. Move the rotary knob to enter Save mode. A window will appear displaying a complete list of the
user slots, including any programs currently residing in the slots. To save a preset, hightlight a slot
by clicking on it, and clicking the Save button.
3. To load a saved preset, use the rotary knob to scroll through all 200 presets. The 100 user slots
appear after the factory presets, so user slot 1 is at roughly the 12 o'clock position.
58
Lexicon