Table of Contents
Advertisement
Lexicon Studio 12T System User Guide for Macintosh and PC
Appendix B
Common Problems and Solutions
Installation & Hardware Recognition
The Lexicon Studio Sound System is not recognized by Windows 95 when first installed.
Make sure you have a Plug and Play ready BIOS that complies with V2.1 of the PCI specification.
Load the default values of the BIOS and try installing the card again.
The Lexicon Studio Sound System appears in the Device Manager tagged with a yellow
exclamation point.
Windows tried to load a driver but failed. Reload the driver.
Check the resources page for a resource conflict. Resources in your computer may have been
depleted before the Core-32 card was installed. Try moving the board to another PCI slot or remove
a card to make more resources available.
A legacy device (a card with manually-set IRQs) may need to be disabled by removing the card.
The Lexicon Studio Sound System appears in the Device Manager with no resources
assigned.
Make sure you have a Plug and Play ready BIOS that complies with V2.1 of the PCI specification.
Load the default values of the BIOS and try installing the card again.
Computer crash and reboot when Lexicon IDS is removed from the Device Manager.
Go into the Device Manager, open the System devices category, highlight the PCI bus entry and click
the Properties button. Under the IRQ steering tab make sure IRQ Steering is unchecked.
B-9
Advertisement
Table of Contents
