Table of Contents
Advertisement
Lexicon Studio 12T System User Guide for Macintosh and PC
A preset is loaded from the PC-90 interface by highlighting the preset name area, and using the rotary
knob to scroll through the 100 factory and 100 user slost available. A preset is automatically loaded
once the rotary knob is used to move to the new preset.
Editing Effects
You can create your own programs or edit any of the presets with the editor. To open the PC-90
interface, click the machine 1 or machine 2 buttons in the Reverb tab on LexPanel.exe. The PC-90
Interface will open.
1. Click on the PARA button, to activate a display of three parameters. The parameter currently
selected for editing is displayed with a border.
2. If the parameter you want to edit is not visible in the display, click on the left or right part of the
Page button to go to another parameter page. To return to Parameter mode, click on the PARA
button again.
3. Set a value for the selected parameter with the Value knob. To make small adjustments, click on
the knob, hold down the mouse button and move the pointer away from the knob before turning
it. The further away from the knob the pointer is, the finer the value adjustments.
4. Use the INC and DEC buttons for super-fine manipulation of the active parameter.
Using the PC-90
57
Advertisement
Table of Contents
