Table of Contents
Advertisement
Lexicon Studio 12T System User Guide for Macintosh and PC
Appendix A
You now have created a cascade reverb within PC-90. This will give you immense flexibility when
creating your own "super-reverbs".
Monitoring the PC90 with No Latency while Recording
The following example shows how to add reverb to your monitor mix without adding the reverb to the
input signal. The input signal and the reverb are monitored in real time with no latency. The input signal
will record to disk dry. Reverb processing can be added to the dry signal during mix down.
Set up the punch tab in the ASIO Control Panel:
1. Enable punch.
2. Select the punch Source. For this example, use 12T_Analog_In L and 12t_Analog_In R.
3. Select the punch destination. For this example use 12T_Analog_Out L and
12T_Analog_Out R.
A-3
Advertisement
Table of Contents
