Table of Contents
Advertisement
Lexicon Studio 12T System User Guide for Macintosh and PC
The diagram below is a flow chart of the audio routing from the previous picture of the control panel.
Notice that PC-90 receives its input from Cubase VST via the VST_Aux_Send_1L and
VST_Aux_Send_1R sources. These sources route any audio assigned to that bus into the PC-90.
As 12T_Analog_Out_L and 12T_Analog_Out_R are selected as destinations, PC-90 audio is
summed with the outputs of Cubase VST, which are also routed to the analog outputs. This allows
monitoring of PC-90 reverb and all audio from VST through the same outputs of the interface.
VST_Aux_Send_1L
PC-90
VST_Aux_Send_1R
VST_Aux_Send_2L
Cubase
PC-90
Sources
VST_Aux_Send_2R
VST_Analog_L
VST_Analog_R
Core-32
12T_Analog_Out_L
Outputs
12T_Analog_Out_R
Using the PC-90
Ana_L
Ana_R
61
Advertisement
Table of Contents
