Pc Software Installation; Install Supported Third Party Audio Software; Install The Windows Lexicon Studio Driver - Lexicon LDI 12T - REV 1 Manual

Lexicon Studio 12T System User Guide for Macintosh and PC

PC Software Installation

Install Supported Third Party Audio Software

Lexicon Studio requires compatible front-end software (such as Cubase Audio VST) to operate.
Please refer to your particular software installation guide for assistance. As Lexicon Studio installs
software within directories of your front-end software, you should install your audio software first and
verify that it launches properly before installing Lexicon Studio (even though it will not be audio-
capable until installation of the Lexicon Studio system).
If you are installing a later version of Lexicon Studio software over your current Studio software, please
skip to the next section entitled Updating Driver and PC-90 Software.
Install the Lexicon Studio Driver for Windows
1. With your Lexicon Studio hardware and third party audio software installed, power up LDI-12T
interface and your computer. Once your computer is fully booted, Windows will identify your Core-
32 as a new PCI multimedia device. In the event of booting problems, refer to the troubleshooting
section of this user guide.
2. The Windows Update Device Driver Wizard will appear. Insert the "Lexicon Studio: Drivers &
Documentation" CD-ROM , and click the Next > button, allowing Windows to perform a search
for the Lexicon Studio driver.
3. Windows will find the driver information for the Lexicon Studio Sound System on the CD-ROM
(if it does not, you may need to Browse to it. Additionally, you may also need to Browse to the
CD-ROM for a file entitled asiolex.dll. Click the Finish button.
4. When the drivers are loaded, you will be prompted to restart your computer. If you are also
installing a PC-90, you should choose not to restart at this time and proceed to the instructions
for installing PC-90 software within the next section. Windows will prompt you twice to restart.
Select No at both prompts and move on to the next section, Installing the PC-90 Software for
Windows . If you are only installing Core-32 drivers, you may now restart your machine.
Installation
11