Installation
Attach the PCI Extender
The extender provides support for cards installed horizontally and prevents boards from touching
each other (which can damage the cards). To attach the extender:
1. Holding the Core-32 assembly by its edges, align the holes of the board and the extender.
2. Insert two screws (provided) from the back of the Core-32 card as shown. Do not overtighten the
screws, as you may damage the PC board.
NOTE: On most new Macintosh models, the PCI bus is sized to fit full-length PCI cards solidly.
On these models (9600, G3 Mini-tower) you will not need to install the PCI Extender.
8
Lexicon