Table of Contents
Advertisement
MPX G2
•
The Diatonic Hmy effect now corrects pitch in
"down" pitch shifts. Setting the Int parameter to
negative (–) pitch shift setting now provides the
correct interval.
•
The Wah2 and PedalWah2 effects will now maintain
accurate output levels when placed in the pre-gain
path. A –3dB change in output level will no longer
occur when either of these effects is assigned in the
Effect 1 bank.
•
Footpedals connected to the MPX G2 will now show
proper tuner offset. When the Tuning Cal option is
not set to A=440.00Hz, the setting will display
correctly on an MPXR1 footpedal connected to the
MPX G2. (The Tuning Cal option is available in Tuner
Mode.)
Software Version 1.1 Installation Instructions & Release Notes
NEW FEATURES
Software Version 1.1 includes the new features described
in this section.
NEW & IMPROVED EFFECTS
•
New effects have been added to the Effect 1, Effect 2,
and EQ banks. Descriptions of these effects begin on
the next page. The table beneath each description
indicates the parameters available for the effect.
•
The following effects have been added to the EQ
bank: SweepFilter, Wah1, Wah2, PedalWah1,
PedalWah2, Test Tone, and Ring Mod. These effects
are identical to the effects included in the Effect 1
and Effect 2 banks.
•
The compressor level in the Wah2 and PedalWah2
effects appears on the same meter as it appears on in
the RedComp effect. The compressor in all three
effects is identical.
. . . New & Improved Effects continues on page 12
11
Advertisement
Table of Contents
