Connect The Ldi-12T Interface To Audio Sources - Lexicon LDI 12T - REV 1 Manual

Installation

Connect the LDI-12T Interface to Audio Sources

Cables/Connections
1. Use only the proprietary Lexicon cable (provided) to connect the Core-32 card to the LDI-12T
Interface.
2. With both the computer and the LDI-12T powered down, attach the cable between the lower
connector on the back of the Core-32 card and the Computer port on the LDI-12T rear panel.
3. Connect the 9V connector to the AC Power port on the rear panel of the LDI-12T, and plug the
other end into a wall socket.
The LDI-12T supports various formats of analog and digital I/O. Make certain your cables are the
correct types prior to connection. (Analog XLR connectors are +4dBu balanced (Pin 2 hot) , analog
RCA connectors are –10dBV unbalanced). To select a source for input or output within the application
software, refer to the documentation provided with your particular software package
When powering up your system, always make sure to turn LDI-12T power on prior to turning on your
computer. This ensures that diagnostics and calibrations necessary for optimum performance are
performed upon starting up your computer system.
10
Lexicon