Ricoh Aficio MP 2500 Network Manual page 33

V
Start the print server by entering the following from the console of the Net-
Ware server.
If the print server is in operation, quit and restart it.
❖ To quit
CAREE: unload pserver
❖ To start
CAREE: load pserver print_server_name
Note
❒ If the printer works as configured, the message "Waiting for job" appears.
Setting up using NIB Setup Tool
A
Log on to the file server as a supervisor or supervisor equivalent.
B
Start NIB Setup Tool from the [Start] menu.
C
Click [Property Sheet], and then click [OK].
D
Select the printer you want to configure, and then click [Next].
A dialog box prompting you to perform the remaining configuration tasks in
the Web browser appears. Click [OK], and then wait until Web Image Monitor
starts automatically.
E
Click [Login].
A dialog box for entering the [Login User Name:] and [Login Password:] appears.
F
Enter the login user name and password, and then click [Login].
For details about the login user name and password, consult your network
administrator.
G
Click [Configuration] in the left area, and then click [NetWare].
H
Confirm the settings, and then click [OK].
Configuration is now complete. Wait several minutes before restarting Web
Image Monitor.
I
Click [Logout].
Reference
p.19 "Setting Up as a Print Server (NetWare 3.x)"
Using NetWare
1
25