Ricoh Aficio MP 2500 Network Manual page 117

Message
Could not attach to P Server<print server>
Current Interface Speed:xxxMbps
Current IP address <currentIP address>
Current IPX address<IPX address>
DHCP lease time expired.
DHCP server not found.
dhcpcd start.
dpsd is disabled.
Duplicate IP=<IP address>(from<MAC ad-
dress>).
Established SPX Connection with PServ-
er,(RPSocket=<socketnumber>, con-
nID=<connection ID>)
exiting
Exit pserver
Frametype =<frame typename>
httpd start.
IEEE 802.11b <communication mode> mode
IEEE 802.11b current channel IEEE 802.11b
current channel
IEEE 802.11b interface up
IEEE 802.11b interface down
IEEE 802.11b card removed
inetd start.
Problem and solutions
(In the remote printer mode) Connection to the
print server has not been established. The
print server has refused the connection. Check
the print server configuration.
Speed of the network (10Mbps, 100 Mbps, or
1Gbps).
Current IPv4 address.
Current IPX address
DHCP lease time has expired. The printer tries
to discover the DHCP server again. The IP ad-
dress until now becomes invalid.
The DHCP server was not found. Make sure
that the DHCP is on the network.
The DHCPCD service (dhcp client service) has
started.
Communication via PictBridge is unavailable
because PictBridge is disabled in the security
mode. Enable PictBridge in the security mode.
The same IP address (IPv,or IPv6 address) was
used. Each IP address (IPv, or IPv6 address)
must be unique. Check the address of the de-
vice indicated in [MAC address].
(In the remote printer mode) Connection to the
print server has been established.
The lpd service has ended and the system is
exiting the process.
(In the print server mode) The print server
function is disabled because the necessary
print server settings have not been made.
The frame type name is configured to be used
on NetWare.
The httpd service has started.
Displays the IEEE 802.11b communication
mode.
Displays the IEEE 802.11b channel number.
The IEEE 802.11b link has been established.
The IEEE 802.11b link has been cut.
The IEEE 802.11b card is not installed correct-
ly.
The inetd service has started.
Message List
2
109