Ricoh Aficio MP 2500 Network Manual page 121

Message
Started.
success but invalid key
terminated.
The print server received error <error
number> during attempt to log in to the net-
work. Access to the network was denied. Ver-
ify that the print server name and password
are correct.
trap account is unavailable.
unauthenticated
usbd is disable.
WINS name registration: No response to serv-
er<WINS server address>
WINS wrong scopeID=<Scope ID>
unauthenticated
WPA supplicant unbound
connecting
no WPA information element in probe re-
sponse,rescanning
authenticated
wpa success key received
waiting for keys
WPA supplicant started
stopped
Note
❒ For details about UNIX commands and parameters, see UNIX Supplement.
Problem and solutions
The bonjour (rendezvous) function is enabled.
The computer received a message reporting
successful EAP authentication, but the EAPOL
key is invalid.
The bonjour (rendezvous) function is disabled.
Login to the file server failed. The print server
is not registered or a password is specified.
Register the print server without specifying a
password.
v3Trap cannot be sent. This could be because
the Trap destination account is different from
the account specified by the printer.
Authentication between the computer and ac-
cess point failed.
Plug and Play function and printing is disa-
bled because usbd is disabled in the security
mode.
Enable usbd in the security mode.
There was no response from the WINS server.
Check the correct WINS server address is en-
tered. Alternatively, check the WINS server is
functioning properly.
An invalid scope ID was used. Use a valid
scope ID.
WPA authentication failed. Check the WPA
configuration.
WPA authentication has started.
WPA is connecting to authenticator.
WPA probe response does not have IE.
WPA authentication was successful.
WPA key reception was successful.
Waiting for WPA key.
wpasupd has started.
wpasupd has ended.
Message List
2
113