Installing Software For Network Printing; Typical Installation - Ricoh 3200SF - Multifunctional SP Network-Ready User Manual

Installing Software for Network
Printing
When you connect your printer to a network, you must first
configure the TCP/IP settings for the printer. After you have
assigned and verified the TCP/IP settings, you are ready to
install the software on each computer on the network.
You can install the printer software using the typical or custom
method.

Typical Installation

This is recommended for most users. All components necessary
for printer operations will be installed.
1
Make sure that the printer is connected to your network
and powered on. For details about connecting to the
network, see the supplied printer's User's Guide.
2
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation
window appears.
If the installation window does not appear, click Start and
then Run. Type X:\Setup.exe, replacing "X" with the
letter which represents your drive and click OK.
3
Click Next.
• If necessary, select a language from the drop-down list.
• View User's Guide: Allows you to view the User's
Guide. If your computer doesn't have Adobe Acrobat,
click on this option and it will automatically install Adobe
Acrobat Reader for you.
7
Installing Printer Software in Windows
4
Select Typical installation for a network printer. Click
Next.
5
The list of printers available on the network appears.
Select the printer you want to install from the list and then
click Next.
• If you do not see your printer on the list, click Update to
refresh the list, or select Add TCP/IP Port to add your
printer to the network. To add the printer to the
network, enter the port name and the IP address for the
printer.
• To find a shared network printer (UNC Path), select
Shared Printer [UNC] and enter the shared name
manually or find a shared printer by clicking the Browse
button.
6
After the installation is finished, a window appears asking
you to print a test page. If you so desire, select the
checkbox and click Finish.