Table of Contents
Advertisement
Introduction
Note
Any damage to the machine caused by the use of accessories not
manufactured or supported by KONICA MINOLTA will void your
warranty.
This chapter provides information about the following accessories.
Tray 2
Duplex Option
Duplex Option and
Attachment
Note
Installing accessories always requires that the machine and
accessories are turned off and unplugged during installation.
10-2
Lower feeder unit with 500-sheet tray included
Auto duplexing
Auto duplexing
For details on the available options, refer to
http://printer. konicaminolta.com.
In order for the duplex option to be installed,
Tray 2 must be installed on the machine.
The attachment is an interface unit for installing
the duplex option on the machine.
During installation, install the attachment before
installing the duplex option.
Introduction
Advertisement
Table of Contents
