Table of Contents
Advertisement
Symptom
Colors are
not register-
ing properly;
colors are
mixed or
have
page-to-pag
e variation.
The color
has a poor
reproduction
or has poor
color density.
If the problem is not resolved, even after all of the above have been per-
formed, contact Technical Support with the error information.
For contact information, refer to the Need Assistance sheet.
9-36
Cause
The scanner unit or
front cover is opened
during the calibration.
Gradations are not
adjusted correctly.
The imaging car-
tridges is not correctly
seated.
One or more of the
toner cartridges may
be defective.
The media is moist
from humidity.
The imaging cartridge
may be defective.
Solving Problems with Printing Quality
Solution
Set
MACHINE SETTING/CALI-
in the
BRATION
UTILITY
, and then perform the AIDC color
ON
calibration. For details, refer to
"MACHINE SETTING Menu" on
page 2-22.
Remove the imaging cartridge and
check for damage. If it is damaged,
replace it.
Remove the toner cartridges and
check for damage. If it is damaged,
replace it.
Remove the moist media and replace it
with new, dry media.
Remove the imaging cartridge and
check for damage. If it is damaged,
replace it.
menu to
Advertisement
Table of Contents
