Specifying The Copy Density; Specifying The Zoom Ratio; Selecting A Preset Zoom Ratio; Specifying A Custom Zoom Ratio - Konica Minolta A0HF012 User Manual

Specifying the Copy Density

1
In the main screen (Copy mode), press the + or , key to select the cur-
rent copy quality setting, and then press the Select key.
2
Press the + or , key to select
3
Press the * or ) key to select the desired copy density, and then press
the Select key.
As the indicator is moved to right, the density becomes darker.
The main screen (Copy mode) appears again.

Specifying the Zoom Ratio

The zoom ratio can be specified either by selecting a preset zoom ratio or by

specifying a custom zoom ratio.

Selecting a Preset Zoom Ratio

1
In the main screen (Copy mode), press the + or , key to select the cur-
rent zoom ratio setting, and then press the Select key.
2
Press the + or , key to select
3
Press the + or , key to select the desired zoom ratio, and then press the
Select key.
The main screen (Copy mode) appears again.
Specifying a Custom Zoom Ratio
1
In the main screen (Copy mode), press the + or , key to select the cur-
rent zoom ratio setting, and then press the Select key.
2
Press the + or , key to select
5-4
If or
TEXT FINE/TEXT
either or
AUTO MANUAL
the copy density.
The following zoom ratios can be selected.
In metric dimensions:
→
50%, 70% (A4 A5), 81% (A4
→
(A5 A4), 200%
In inch dimensions:
→
50%, 64% (LT ST), 78% (LG
→
(ST LG), 200%
The zoom ratio cannot be changed using the keypad.
, and then press the Select key.
DENSITY
is selected as the copy mode, select
in step 3. If
MANUAL
, and then press the Select key.
FIXED
→
B5), 100%, 115% (B5
→
LT), 100%, 129% (ST
, and then press the Select key.
MANUAL
Making Basic Copies
is selected, specify
→
A4), 141%
→
LT), 154%