Table of Contents
Advertisement
This message...
COMMUNICATION ERROR
USB Memory
COMMUNICATION ERROR
xxx Server
DISCONNECT
USB Memory
DISCONNECT
xxx Server
DESTINATION SET
BY MANUAL UP TO 16
I/C END
I/C LIFE END
REPLACE I/C
I/C LOW
Status, Error, and Service Messages
means...
While data was
being sent in Scan
mode, the connec-
tion to the USB
memory device was
interrupted.
While data was
being sent in Scan
mode, the connec-
tion to the server
was interrupted.
The connection to
the USB memory
device was inter-
rupted.
The connection to
the server was inter-
rupted.
There were more
than 16 addresses
found with an LDAP
search.
The time to replace
the imaging car-
tridge has been
reached.
The time to replace
the imaging car-
tridge has been
reached.
The imaging car-
tridge is nearly
empty.
Do this...
Check the connection
to the USB memory
device, and then try
sending the data
again.
Check the settings
specified in the NET-
WORK SETTING and
E-MAIL SETTING
menus, and then try
sending the data
again.
Check the connection
to the USB memory
device, and then try
sending the data
again.
Check the settings
specified in the NET-
WORK SETTING and
E-MAIL SETTING
menus, and then try
sending the data
again.
Increase the number of
entered characters,
and then perform the
search again.
Replace the imaging
cartridge.
Replace the imaging
cartridge.
Prepare the imaging
cartridge.
9-39
Advertisement
Table of Contents
