Use The Setup Wizard - NETGEAR Nighthawk RS700 User Manual

Use the Setup Wizard

You can use the Setup Wizard to redetect your Internet settings and automatically set
up your router.
To use the Setup Wizard:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup Wizard.
The Setup Wizard page displays.
5. Select the Yes radio button.
6. Click the Next button.
The Setup Wizard searches your Internet connection for servers and protocols to
determine your Internet configuration.
7. Follow the onscreen instructions.
The router detects your Internet settings.
8. Follow the onscreen instructions to complete the Setup Wizard process.
If the router does not detect the Internet settings, the Setup Wizard cannot complete
its process, and you must start the Setup Wizard again:
1. Before you start again, review your settings. Make sure that you select the correct
options and type everything correctly.
2. If the router still does not detect the Internet settings, contact your ISP to verify that
you are using the correct configuration information.
3. If problems persist, register your router and contact NETGEAR Technical Support.
Specify Your Internet Settings
Nighthawk WiFi 7 Tri-Band Router Model RS700
34 User Manual