FUTABA 10CAP Instruction Manual page 37

Home screen display mode selection ( HOME-DISP ) ( HELI only): selects the display item in the home screen for HELI .
ILLUST : displays the illustration of helicopter in the home screen. (default)
THR/PIT : displays the current throttle and pitch position in the home screen.
GOAL of EXAMPLE:
Change the display mode from ILLUST to
THR/PIT .
USER NAME : assigns your transmitter's name which is displayed in the home screen.
GOAL of EXAMPLE:
Name USER NAME "Futaba".
ILLUST mode
STEPS:
O p e n B A S I C m e n u , t h e n o p e n
PARAMETER submenu.
Go to HOME-DISP and change setting.
(Ex: THR/PIT )
Close.
Adjustability and values:
• Up to 8 characters long.
• Each character may be a letter, number, blank, or a symbol.
• The default name assigned by the factory is "Futaba" logo.
STEPS:
O p e n B A S I C m e n u , t h e n o p e n
PARAMETER submenu.
Go to USER NAME and select the first
character. (Ex: _ to F)
Choose the next character to change.
Repeat the prior steps to complete
naming the model.
Close.
37
THR/PIT mode
INPUTS:
for 1 second.
(If ADVANCE ,
C to PARAMETER .
C to HOME-DISP .
to THR/PIT .
INPUTS:
for 1 second.
(If ADVANCE ,
to 2nd page of menu.
C to PARAMETER .
to 2nd page of menu.
to USER NAME
C
to F .
C
to u
(note: lower case is available)
Repeat.
again.)
again.)