Display - Wacom CINTIQ 21UX DTK-2100 Installation Manual

DISPLAY

Display panel
Screen size
Aspect ratio
Number of pixels
Input video signal
Supported resolution
White luminance uniformity
Synchronization range
Timing modes
Pixel pitch
Viewing angles @ CR10:1
(horizontal/vertical)
Display colors
Contrast ratio
Response time (Tr+Tf)
Luminance
OSD manual control
Plug and Play
LCD quality
a-Si active matrix TFT LCD (IPS type)
21.3 in, 432 x 324 mm (17.0 x 12.8 in)
4 : 3
1600 x 1200
Digital: DVI 1.0 compliance / Analog RGB
1600 x 1200, 1280 x 1024, 1024 x 768, 800 x 600, 640 x 480
72% (typ.) center
50 to 75 Hz vertical, 30 to 80 kHz horizontal
(UXGA: 60 Hz vertical, 75 kHz horizontal)
5 preset modes + 24 user modes
0.270 (H) x 0.270 (V) mm (0.011 x 0.011 in)
170(85/85) / 170(85/85) (typ.)
16.7 million colors
550 : 1 (typ.)
20 ms (typ.)
220 cd/m2 (typ.), LCD panel only
200 cd/m2 (typ.), with protection glass
Brightness, contrast, pitch, phase, vertical position, horizontal
position, transparency, auto adjust, language, back light, menu
position, reset, scaling, color temperature (9300K/6500K/5000K/
Custom/User/Direct)
DDC 2B, DDC/CI
Each LCD panel is produced under very stringent quality standards.
Production techniques cannot guarantee an absolutely perfect TFT
display. Wacom does not allow any pixel to be always white or
always black. A small number of pixels are allowed to show a
wrong color for some parts of the color spectrum. This does not
mean the display is defective.
Appendix
Page 69