Adjusting Pitch And Phase (Vga Only) - Wacom CINTIQ 21UX DTK-2100 Installation Manual

ADJUSTING PITCH AND PHASE (VGA ONLY)

Some computers and video cards may not allow the auto-sync function to fully work when Cintiq is
first connected. If some portion of text appears blurred, use the A
synchronize to the incoming signal (see "Factory presets, auto-sync, and user settings" on page 38).
If the image is still blurred, adjust pitch and phase by following the below procedure. For optimal
display quality, set your video card to the maximum (native) resolution that can be used with Cintiq.
See the "Product specifications" on page 68 for details.
1. In the Wacom Tablet control panel, select
the C tab.
ALIBRATE
2. If you are working with multiple displays,
be sure the option corresponding to Cintiq
is selected in the M
3. Click on the C
ALIBRATE
the calibration screen.
4. Using the OSD controls, open the OSD
menu and select the P
Then adjust the pitch level so the pattern of
fine vertical stripes displays evenly.
(For details on changing the OSD settings,
see "On Screen Display (OSD) settings" on
page 38.)
5. In the OSD menu select the P
Adjust the phase level so that the
adjustment pattern shows clearly.
6. After completing these adjustments, press
the E and M
NTER
OSD menu.
7. Click on the C
ANCEL
exit the calibration screen.
menu.
ONITOR
... button to activate
option.
ITCH
option.
HASE
buttons to exit the
ENU
button or press E to
SC
A option to automatically
UTO DJUST
Adjustment pattern for pitch and phase.
Customizing
Page 37