Wacom CINTIQ 21UX DTK-2100 Installation Manual page 57

The line you are drawing does not
line up with the location of the
screen cursor.
The computer does not go to
sleep.
The screen cursor jumps back
when using your regular mouse or
trackball.
The screen cursor moves erratically
or jumps around on the display
screen when another tablet is
connected to your computer.
When working in some
applications, the ExpressKeys or
Touch Strips perform a different
function than what is set in the
Wacom Tablet control panel.
Touch Strip functions do not toggle
properly, or toggle erratically when
pressing the Touch Toggle button.
To function properly, some applications require that the pen
is set to P mode. Make sure the pen has not been toggled
EN
to M mode.
OUSE
If the pen is set to P
EN
then you may have a corrupted preferences file. Follow the
instructions in the Windows or Macintosh troubleshooting
sections to create a new preferences file.
When you are not using the pen, remove it from the pen
display surface or the Cintiq will continue to send data,
keeping the computer awake.
When the pen is not in use, place it in the pen holder, or at
some location near the pen display – but not on the display.
Leaving your pen on the display may interfere with screen
cursor positioning when using other input devices.
The tablet portion of Cintiq emits electromagnetic waves at a
certain frequency. If another tablet is too closely placed to
Cintiq it may interfere with screen cursor positioning. If this
occurs, move the tablet further away from Cintiq.
Some applications can override and control the ExpressKey
and Touch Strip functions. See the Software User's manual
for information on using applications integrated for tablet
control.
If you use application-specific settings, be sure you have
updated the settings for the correct application.
As you press the Touch Toggle button, be sure you are not
inadvertently touching the Touch Strip on the back of the
unit. The toggle function will not activate if you are using (or
touching) a Touch Strip at the same time you press the Touch
Toggle button.
mode and the problem still exists,
Troubleshooting
Page 53