Testing Controls And Input Tools; Testing The Expresskeys - Wacom CINTIQ 21UX DTK-2100 Installation Manual

TESTING CONTROLS AND INPUT TOOLS

If the Grip Pen, or the Cintiq ExpressKeys or Touch Strips do not work as you expect, it is a good idea
to first check the assigned functions or reset them to their default conditions. A quick way to return a
pen to its default settings is to remove it from the T
button. After the pen has been removed, place it back onto the display screen surface. The pen will
be added back to the T
• Open the Wacom Tablet control panel and click on the A
appears, click on the D
information about the Cintiq pen display and pen. This information is used when testing Cintiq
and your input tool.
• If more than one Cintiq unit is connected to your system, in the T
for which you are testing.
• Use the information presented in the D
pen.
Note: When testing your tool buttons, if a button is set to R
will occur when the button is pressed. In this case you may want to change the button function
before testing.

TESTING THE EXPRESSKEYS

1. With the D
IAGNOSTICS
ExpressKey. If more than one Cintiq unit is connected to your system, be sure you have selected
the unit you are testing from the T
2. Test the keys by clicking them one at a time. Each time you press a key, its number will be
displayed next to either the L
you are testing.
3. When you are done, click the C
Important: Remember that some applications can override and control the ExpressKey functions.
Consider closing any open applications except the Wacom Tablet control panel when testing
the ExpressKeys.
Troubleshooting
Page 44
list with its default settings.
OOL
... button. The D
IAGNOSE
IAGNOSTICS
dialog box open, observe the T
I
ABLET
K or R
EFT EYS
button to exit the dialog box.
LOSE
list by clicking on the control panel list's [ – ]
OOL
BOUT
dialog box displays to show dynamic
IAGNOSTICS
dialog box when testing your pen display and
ADIAL
I
ABLET NFO
column.
NFO
K category, depending on which keys group
IGHT EYS
button. In the dialog box that
I column select the unit
ABLET NFO
M or O /R ..., that function
ENU PEN UN
column as you test each