The Scanner Utility Program - Plustek OPTICPRO 12000P TURBO User Manual

PicturePublisher to gain access to the scanner.
6. Within PicturePublisher, click on FILE and then choose ACQUIRE.
7. The Plustek EPP Scanner (TWAIN) window will open.
8. CLOSE the Guided Scan window and click the SCAN button.
9. In the PhotoFix window that opens, click CANCEL.
If an image appears on your screen, your scanner is working properly. To learn
how to manipulate the image, please read the Image Editor - PicturePublisher section
of the Software User's Guide .
Note: If the test failed in any way, please read The Scanner Utility Program
Attention

The Scanner Utility Program

The Scanner Utility, located inside the scanner Program Group, is for
determining and updating your parallel printer port configuration. In addition, it
contains a number of other features to help you tailor and control the scanner.
Correct port settings are crucial for the operation of the scanner. If you have
received the error message Unable to find the scanner or Unable to establish
connection with scanner, chances are you only need to adjust the Ports or Modes
settings.
Two other features of the Scanner Utility program are the scanning lamp
controls and the scanning position alignment utility. The Scanner Utility allows
you to turn the scanning lamp on and off, and define an idle time for the scanning
lamp to automatically turn itself off. Also, it allows you to define the exact position on
the scanning glass where scanning will begin. The scanner lock was designed to hold
the scanning lamp in place during shipping, but some refinement of the initial
scanning position may still be necessary.
section of this manual and follow the instructions therein.
10