Scanner Overview - Plustek OpticFilm 8100 User Manual

Scanner Overview
Film Holder Slot: Insert the film holder into the scanner through dust cover. The
film holder can be inserted from either side. The film holder will index at each
frame using the notches on its side rails.
Power LED: It indicates the scanner status.
Light
On The scanner is turned on, ready to scan images.
The scanner is off, either because the power is not turned
Off on, or because the power cord is not properly plugged into
an AC power outlet.
IntelliScan Button: You may press the button to launch the SilverFast application.
*This function is not supported on Mac OS X.
QuickScan Button: You may press the button to launch the QuickScan application.
*This function is not supported on Mac OS X.
Power Button: Use this to turn the scanner ON or OFF.
Serial Number Sticker: Located at the rear of the scanner.
Power Receptor
USB Port
You will need the 12 digits Serial Number for SilverFast software
activation. You will also need it when you contact your dealer or
Attention
our service center in the future.
5
Status