Figure 24 Status: Port Details
The following table describes the labels in this screen.
Table 7 Status: Port Details
LABEL
Port Info
Link
Status
LACP
TxPkts
RxPkts
Errors
Tx KB/s
Rx KB/s
Chapter 6 System Status and Port Statistics
DESCRIPTION
This field displays the speed (either 10M for 10Mbps, 100M for 100Mbps or 1000M for
1000Mbps) and the duplex (F for full duplex or H for half duplex). It also shows the
cable type (Copper or Fiber).
This field shows the training state of the ports. The states are FORWARDING
(forwarding), which means the link is functioning normally or STOP (the port is stopped
to break a loop or duplicate path).
This field shows if LACP is enabled on this port or not.
This field shows the number of transmitted frames on this port
This field shows the number of received frames on this port
This field shows the number of received errors on this port.
This field shows the number kilobytes per second transmitted on this port.
This field shows the number of kilobytes per second received on this port.
GS-4012F User's Guide
65