Prestige 643 ADSL Router
Chapter 5
Remote Node TCP/IP Configuration
This chapter shows you how to configure the TCP/IP parameters of a remote node.
5.1
LAN-to-LAN Application
A typical LAN-to-LAN application uses your Prestige to connect a branch office to the headquarters, as
depicted in the following diagram.
Figure 5-1 TCP/IP LAN-to-LAN Application
For the branch office, you need to configure a remote node in order to dial out to headquarters.
Additionally, you may also need to define static routes if some services reside beyond the immediate
remote LAN.
5.1.1 Editing TCP/IP Options
Follow the steps below to edit Menu 11.3 – Remote Node Network Layer Options.
In Menu 11.1, move the cursor to the Edit IP/IPX/Bridge field, then press [SPACE BAR] to set the value
to Yes. Press [ENTER] to display Menu 11.3 – Network Layer Options.
Remote Node TCP/IP Configuration
5-1