Adding Fibre Channel or Remote
Management Cards
CAUTION
This library contains very sensitive electrical components. It is important
to follow the proper procedures to prevent electrostatic discharge (ESD).
Use wrist-grounding straps and anti-static mats when removing and
replacing cards and major assemblies.
Failure to follow proper procedures could lead to intermittent failures or
premature hard failures.
CAUTION
The Fibre Channel printed circuit boards contains a laser system that is
classified as a "Class-I Laser Product" under a U.S. Department of Health
and Human Services (DHHS) Radiation Performance standard according
to the Radiation Control for Health and Safety Act of 1968 and EN60825-
1(+A11) safety of laser products.
Chapter 1
Remember to:
Use high-performance Fibre Channel cards on any level of the
library that contains Ultrium drives. See Table 3-7 on page 3-14
and Table 3-8 on page 3-15 for an illustration of the high-
performance and standard-performance Fibre Channel cards.
Adding Fibre Channel or Remote Management Cards
Upgrading the Library
1-11