2. Install the two long 6-32 T-10 screws that are next to the soft keys to
Figure 2-37
Connecting the Front Panel
3. Re-install the display cover by easing the top of the cover underneath
4. Install the viewing window, and tighten the two phillips head screws
5. Install the four screws that connect each chin plate (see Figure 2-35
Chapter 2
secure the display to the chassis (see Figure 2-37).
the forehead and sliding it down (see Figure 2-35 on page 2-67).
Tighten the two 6-32 phillips head screws to secure the display cover
in place.
to secure the window in place.
on page 2-67 for all screw locations).
Removing and Replacing Major Library Components
Removing and Replacing the Front Panel Display
2-69