Removing and Replacing Major Library Components
Removing and Replacing the Power Supply
5. Remove the power supply with one hand and pull outward. Support
the bottom of the power supply to avoid dropping the module.
Replacing the Power Supply
1. Grasp the power supply handle with one hand while supporting the
bottom with your other hand. Align the power supply with the guide
notch at the top of the power supply bay.
2. Fully insert the power supply into the library.
3. Replace the stop bracket (for Model 2/20 only).
4. Tighten the two thumbscrews.
5. Connect the power cord to the power supply.
2-60
Chapter 2