Replacing The Front Panel Display; Figure 2-36 Removing The Front Panel Display - HP A5585A - SureStore DLT E Tape Library 4/40 Upgrade And Replacement Instructions

Tape library upgrade and replacement instructions
Hide thumbs Also See for A5585A - SureStore DLT E Tape Library 4/40:
Table of Contents

Advertisement

Figure 2-36
Removing and Replacing Major Library Components
Removing and Replacing the Front Panel Display
4. Remove the two 6-32 screws that connect the display to the chassis
(Figure 2-36).
Removing the Front Panel Display
5. Remove the front panel display by sliding it upward, then gently
lifting it away from the front of the library.
6. Disconnect the cable from the back of the display by grasping the
sides of the connector and pulling outward. Place the front panel in
an ESD-protected area.

Replacing the Front Panel Display

1. Connect the display cable to the front panel connector. The display
attaches to two tabs on the side of the display opening. Attach the
display on the tabs and slide it down.
For multi-level libraries, ensure the display cable is not obstructing
the vertical lift transport assembly by attaching it to the inside edge of
the library chassis.
2-68
Chapter 2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2/204/406/604/1006/1206/140 ... Show all

Table of Contents