Digital Clock; Multi-Functional Indicator (Onboard Computer) - Skoda SUPERB - 05-2009 Manual

Hide thumbs Also See for SUPERB - 05-2009:
Table of Contents

Advertisement

Caution
We recommend that you do not reset the Service Interval Display yourself other-
wise this can result in the service interval display being incorrectly set, which may
also result in problems with operation of your vehicle.
Note
Never reset the display between service intervals otherwise this may result in
incorrect readouts.
information is retained in the Service Interval Display also after the battery of
the vehicle is disconnected.
If the instrument cluster is exchanged after a repair, the correct values must be
entered in the counter for the Service Interval Display. This work is carried out by a
specialist garage.
The data displayed is the same after resetting the display with flexible service
intervals (QG1) using the reset button as that for a vehicle with fixed service inter-
vals (QG2). We therefore recommend having the Service Interval Display reset only
by an authorised Škoda Service Partner who is familiar with the procedure for reset-
ting the display with a vehicle system tester.
Please refer to the brochure Service schedule for extensive information about
the service intervals.

Digital clock

The time is set with the buttons
Select the display which you wish to change with the button
A
change with the button
.
7
On vehicles which are fitted out with the information display*, it is possible to set
the time in the menu Time ⇒ page 30.
Using the system
Safety
A
A
⇒ page 17, fig.
and
17.
3
7
A
and carry out the
3
Driving Tips
Instruments and Indicator/Warning Lights
WARNING
The clock should not be adjusted while driving for safety reasons but only
when the vehicle is stationary!

Multi-functional indicator (onboard computer)*

Introduction
The multi-functional indicator appears in the display
information display ⇒ page 26 depending on the equipment fitted to your vehicle.
The multi-functional indicator offers you a range of useful information.
The outside temperature
Driving time
Current fuel consumption
Average fuel consumption
Range
Distance driven
Average speed
Current speed*
Warning against excessive speeds*
On vehicles which are fitted out with information display*, it is possible to switch
off the display of some information.
Caution
Pull out the ignition key while having contact with the display (for example when
cleaning) in order to prevent any damage.
General Maintenance
Breakdown assistance
⇒ page 22, fig. 20
or in the
⇒ page 24
⇒ page 24
⇒ page 24
⇒ page 24
⇒ page 25
⇒ page 25
⇒ page 25
⇒ page 25
⇒ page 25
Technical Data
21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Superb

Table of Contents