Skoda SUPERB - 05-2009 Manual page 25

24 Instruments and Indicator/Warning Lights
The following readouts of the selected memory will be set to zero with the button
A
:
D
•
average fuel consumption,
•
distance driven,
•
average speed,
•
Driving time.
You can only operate the multi-functional indicator when the ignition is switched
on. After the ignition is switched on, the function displayed is the one which you last
selected before switching off the ignition.
Outside temperature
The outside temperature appears in the display when the ignition is switched on.
If the outside temperature drops below +4 °C, a snow flake symbol (warning signal
for ice on the road) appears before the temperature indicator
warning signal sounds. After pressing the rocker switch
⇒ page 22, fig. 21
lever or the button
⇒ page 23, fig.
22, the function shown last is indicated.
Fig. 23 The outside tempera-
ture
⇒ fig. 23
and a
A
at the windshield wiper
A
A
at the multifunction steering wheel
C
WARNING
Do not only rely upon the information given on the outside temperature
display that there is no ice on the road. Please note that black ice may also be
present on the road surface even at temperatures around +4 °C - warning,
drive with care!
Driving time
The driving time which has elapsed since the memory was last erased, appears in
the display. If you wish to measure the driving time as of a particular time, you must
set the memory to zero at this moment in time by pressing the button
⇒ page 22, fig. 21
windshield wiper lever
⇒ page 23, fig. 22
tion steering wheel*
The maximum distance indicated in both memories is 99 hours and 59 minutes.
The indicator is set back to null if this period is exceeded.
Current consumption
The current fuel consumption level is shown in the display in litres/100 km. This
information can help you to adapt your style of driving to the fuel consumption you
wish to achieve.
The display appears in litres/hour if the vehicle is stationary or driving at a low
speed.
The indicated value will be updated every 0,5 seconds while you are driving.
Average fuel consumption
The average fuel consumption since the memory was last erased is shown in the
display in litres/100 km ⇒ page 22. This information can help you to adapt your
style of driving to the fuel consumption you wish to achieve.
If you wish to determine the average fuel consumption over a certain period of time
you must set the memory to zero at the start of the measurement using the button
A
on the
B
A
or the handwheel on the multifunc-
D
for longer than 1 second.