Skoda SUPERB - 05-2009 Manual page 158

Other possible commands
Voice command
CALLS (SELECT)
REPEAT
BACK
DELETE
CANCEL
Dial number
– Press the button PTT
– Give the command DIAL NUMBER after the signal tone.
After giving this command, the system requests the entry of a telephone number.
The telephone number can be entered as an interconnected spoken row of digits
(complete number), in the form of order of digits (separation through a brief voice
pause) or through individually spoken digits. After each order of digits (separation
through brief voice pause) the detected digits are repeated.
The digits zero to nine are permitted. The system detects no continuous digit
combinations such as twenty-three, but only individually spoken digits (two, three).
You can enter the selected number in random digital blocks or as a whole number
at once. We recommend to enter the selected number in digital blocks to each
three digits.
If you enter more than 20 digits, the system announces: "The number is too long".
Using the system Safety
Activity
The telephone number is selected.
The entered name or the digits are repeated. Then
the system requests with voice response "please
proceed" the entry of further digits or commands.
The entered name or the last entered order of digits is
erased. Previously entered groups of digits are
repeated. Then the system requests with voice
response "and proceed?" the entry of further digits
or commands.
All entered digits are erased.
The dialogue is ended.
A ⇒ page 153, fig.
157.
1
Driving Tips
For an international call you can enter the symbol instead of the two zeros at the
beginning of the selected number Plus (+).
Example when entering a telephone number
Voice command
DIAL NUMBER
e.g. SIX ZERO THREE
e.g. ONE TWO THREE FOUR
z. B. FIVE SIX
CALLS (SELECT)
If no entry is put in, the following announcement is made after about 5 seconds.
You can interrupt the dialogue at any time by pressing the PTT button or with the
voice command CANCEL.
Repeat last call
A ⇒ page 153, fig.
– Press the button PTT
1
– Give the command REDIAL after the signal tone.
After giving this command, the last number selected via voice input is selected
again.
Example of redial
Voice command
REDIAL
General Maintenance Breakdown assistance
Communication
Announcement
"The number please"
"Six zero three"
"And proceed?"
"One, two, three, four"
"And proceed?"
"Five, six"
"The number is being dialed"
"Possible commands are: dial,
repeat, back, or delete"
157.
Announcement
"The number is being dialed"
Technical Data
157