Skoda SUPERB - 05-2009 Manual page 266

Remove and install the outer part of the rear light unit
– Switch the ignition and all lights off.
– Open the boot lid/luggage compartment door.
⇒ page 264, fig. 238
– Take out the plug
19)
using a torx wrench
– Carefully take out the light. Do not pull the grommet with the cables
out of the body.
– To re-insert the rear light unit, first of all guide it with the support
⇒ fig. 240
towards the front onto a bolt on the bodywork.
– Carefully press the rear light unit into the bodywork.
– Screw the rear light unit tight and press in the plugs
fig. 238.
Remove and install the inner part of the rear light unit
– Switch the ignition and all lights off.
– Open the boot lid/luggage compartment door.
19)
The torx wrench is located in a vehicle toolkit box on the spare wheel.
Using the system Safety
Fig. 239 Remove the inner
part of the rear light unit
and unscrew the rear light unit
.
⇒ page 264,
Driving Tips
– Take off the cover of the rear light unit on the inner side of the bonnet
⇒ fig.
lid 239.
– Press the spring bolt
housing of the rear light unit.
– To re-insert the lamp holder, guide it into the housing of the rear light
unit.
– Press onto the spring bolt until it is heard to lock.
– Guide the cover of the rear light unit into the inner side of the bonnet
lid.
Caution
When removing and installing the rear light unit make sure not to damage the
paintwork of the vehicle and the rear light unit.
Changing light bulbs in the rear light unit
A
A
General Maintenance
Fuses and light bulbs
⇒ fig. 239
and take the lamp holder out of the
Fig. 240 Outer part of the
rear light unit: Lamps
Breakdown assistance Technical Data
265