222
Inspecting and replenishing
Inspecting and replenishing
Engine compartment
Bonnet remote release
Bonnet remote release
– Pull the unlocking lever below the dash panel on the driver's side
⇒ fig.
200.
The bonnet jumps out of its lock as a result of the spring force.
Opening and closing the bonnet.
Fig. 200 Bonnet release
lever
Opening the bonnet
– Unlock the bonnet
– Ensure that the arms of the windscreen wipers are correctly in place
– Press the locking button
– Grasp the bonnet at the bottom part of the radiator grille and lift it
Closing the bonnet
– You can overcome the force of the gas pressure support by pulling the
– Allow the bonnet to drop from a height of about 30 cm into the lock -
⇒ fig.
200.
against the windscreen before opening the bonnet otherwise
damage could occur to the paintwork.
⇒ fig.
201, the bonnet is then unlocked.
towards the top so that it is held opened by the gas pressure support.
bonnet towards the bottom.
bonnet do not press down on it!
Fig. 201 Radiator grille:
Lever of the locking button